Digisol introduces new range of Wi-Fi 6 Access Points to offer improved performance – Times of India
Digisol APs: Availability
For more information about product availability, interested users can visit the company’s official website www.digisol.com.
Importance of Digisol APs
Most devices, including smartphones, tablets and laptops, support the latest Wi-Fi 6 or 802.11ax standard and offer speeds that can go beyond what a standard 1Gbps physical Ethernet (LAN) cable can support. So, it is important to upgrade the IT infrastructure to a new wireless network that can replace physical Ethernet connections.
Businesses can replace the old dual-band AC (Wi-Fi 5) routers and access points with Digisol’s DG-WM840AX or DG-WM640WI and strengthen its IT department with data throughput speeds of up to 1800Mbps. With the new APs, companies can also instantly switch to 8K streaming and AR/VR applications over Wi-Fi.
Digisol APs: Key features
These Digisol APs are equipped with DL/UL-OFDMA modulation that can upload or download multiple packets at the same time. It uses the 1024-QAM modulation, which is more efficient than the older 802.11ac modulation. It also improves the throughput of single spatial traffic and claims to increase it by 25%. Additionally, it has a narrower sub-carrier spacing and longer symbol time with improved stability and data processing efficiency which is important for high-density access environments such as large office spaces, malls, and more. Each access point works on dual-band 5GHz and 2.4GHz to support a broad range of new and older devices too.
The Digisol Wi-Fi 6 APs can also group the connected devices into different TWT cycles, increase sleep time, reduce the device competing after wake-up, and save the device power. This makes Wi-Fi 6 one of the most power-efficient networks that help battery-operated devices such as laptops, tablets, and handhelds save on power which uses the network only when data is being transmitted.
Lastly, it also features improved anti-interference with support for BSS colour bit and dynamic CCA-SD (Clear Channel Assessment Signal Detection) threshold and power adjustment. This effectively improves the channel interference in multi-users scenarios and improves the utilisation of spectrum resources. This is a great option for areas and spaces where numerous devices are connected to the AP, especially in IoT-based environments. There’s also support for multiple SSIDs (x8), Guest SSIDs, Hidden SSIDs, VLAN, and more.
Moreover, the Digisol DG-WM840AX Ceiling-mounted and DG-WM640WI In-wall Access Points are also compatible with Digisol’s DG-WU2001, DG-WU2003, DG-WU2004 & DG-WU2008 Wireless Access Controllers. These are mid-sized enterprise gateways based on CAPWAP protocol with 4 x Gigabit WAN ports, and support load balancing, Ethernet backup, VLAN management, and firewall that are used for local and remote GUI-based WAP control, configuration and management.
Digisol DG-WM840AX — 11ax 1800Mbps ceiling wireless Access Point: Key features
This is an 11ax Wi-Fi 6 Standard access point powered by a Qualcomm quad-core IPQ6000 CPU that offers a highly stable performance along with 4 built-in 3dBi dual-band MIMO antennas. It features 20% increased high-speed data forwarding, improved Anti-Interference by up to 33%, decreased latency by up to 36.8%, and higher efficiency with CPU utilization at less than 20% with multiple device access. Connectivity support includes 1 x LAN and 1 x WAN/POE 1GBps port with an optional 12VDC 1.5A Power adapter socket.
Digisol DG-WM640WI — 11ax 1800Mbps in-wall/wall-mounted wireless Access Point: Key features
This access point is better for indoor use, especially in homes, offices, factories, hotels, and many such areas where both Wi-Fi and Ethernet connections are required for endpoints. The WM640WI is powered with multiple Ethernet ports and support for MU-MIMO, Wave2.0, OFDMA, and Seamless Roaming. It features combined Wi-Fi speeds of up to 1800Mbps over two radios — 2.4GHz (600Mbps 11ax 2×2) + 5GHz (1200Mbps 2×2) with MU-MIMO and DL/UL-OFDMA modulation and equipped with 4 x Gigabit LAN/WAN ports.
Both the Digisol DG-WM840AX Ceiling-mounted and DG-WM640WI In-wall Access Points support 1024QAM, long OFDM symbol, 160M bandwidth, and 11ax 2×2 MIMO technology for wireless data rates of up to 1.8Gbps, to meet the demands of high-speed apps such as VR/ AR, 4K, or 8K streaming media. Up to 64 simultaneous users can connect on each band (128 total on 2.4G and 5G bands) and the AP can be easily configured, accessed and managed via wireless access controllers.
For all the latest Technology News Click Here
For the latest news and updates, follow us on Google News.