Site icon TechNewsBoy.com

Lean and mean: Maximizing 5G communications with an energy-efficient relay network

Credit: 2021 Symposia on VLSI Technology and Circuits

Scientists at Tokyo Institute of Technology (Tokyo Tech) have developed a wirelessly powered relay network for 5G systems. The proposed battery-free communication addresses the challenges of flexible deployment of relay networks. This design is both economical and energy-efficient. Such advances in 5G communications will create tremendous opportunities for a wide range of sectors.

The ever-increasing demand for wireless data bandwidth shows no sign of slowing down in the near future. Millimeter wave, a short wavelength spectrum, has shown great potential in 5G communications and beyond. To leverage high-capacity millimeter-wave frequencies, phased-array antennas (antenna elements that work together to boost signal strength in a specific direction) are being adapted. However, the current use case is confined to line-of-sight propagation.

As a result, relay nodes are considered for non-line-of-sight communications (Figure 1). While relaying can provide improved bandwidth, coverage, and reliability, the flexible deployment of a relay network poses some challenges. The most significant challenge in relay networks is power supply. A typical relay node has its own power supply unit or is connected to an external power source.

Now, a team of scientists from Tokyo Tech, led by Prof. Kenichi Okada, has proposed a wirelessly powered 28-GHz phased-array relay transceiver for the 5G network. Their work is scheduled for presentation in the 2021 Symposia on VLSI Technology and Circuits, an international conference where emerging trends and novel concepts on semiconductor technology and circuits are explored.

Lean and mean: Maximizing 5G communications with an energy-efficient relay network
The vector-summing backscatter up-converts 4GHz I/Q signal and transmits at 28GHz. Credit: 2021 Symposia on VLSI Technology and Circuits

A vector-summing backscattering technique is used to realize the proposed design. The transmitter works as a backscatter with 24GHz local oscillator (LO) and 4GHz intermediate frequency (IF) signals (Figure 2). Okada elaborates, “Backscatter communication makes it possible to harvest energy from incident signals and reflects back parts of the same signals while modulating the data. In this design, backscatter up-converts the 5G New Radio (5G NR) spectrum at 4 GHz and transmits at 28 GHz.” The transmitter also acts as a phase shifter, allowing it to alter the phase of an incoming signal. The backscattering and phase-shifting capabilities of the transmitter facilitate beamforming, wherein an array of antennas can be controlled to transmit signals in a specific direction. As a result, information is transferred more efficiently with less interference.

The receiver and rectifier operation is another critical feature of the transceiver. Passive phase shifters and power combiners (which combine power fed at multiple ports) are used to boost the received signal power for wireless power transfer (WPT). The proposed rectifier acts as a self-heterodyne mixer. In other words, the rectifier splits and recombines an incoming beam with a modulated version of itself. It also works as a full-wave rectifier with the 24 GHz WPT signal.

The entire phased-array relay transceiver is configured in an area as small as 1.8 mm2 (Figure 3). In the receive mode, the wirelessly powered 4 x 8 array module produces 3.1 mW of power. In the transmit mode, it produces -2.2 dBm of saturated equivalent isotropic radiated power (EIRP), which is the output power radiated from an antenna in a single direction. The vector-summing backscatter covers a 360-degree phase range with 7-bit phase resolution while consuming just 0.03 mW in both transmit and receive mode.

The proposed chip is manufactured using a standard 65-nm CMOS technology, and the 4X8 element phased-array relay module is composed by the four chips. Credit: 2021 Symposia on VLSI Technology and Circuits

Okada concludes, “The proposed battery-free transceiver enhances 5G connectivity by serving as a repeater between indoor and outdoor environments. This, in turn, will improve user experiences and create new opportunities for operational efficiency in internet-of-things, industrial automation, and new communication services.”


Pushed to the limit: A CMOS-based transceiver for beyond 5G applications at 300 GHz


More information:
A 28-GHz Phased-Array Relay Transceiver for 5G Network Using Vector-Summing Backscatter with 24-GHz Wireless Power and LO Transfer, 2021 Symposia on VLSI Technology and Circuits, vlsisymposium.org
Provided by
Tokyo Institute of Technology

Citation:
Lean and mean: Maximizing 5G communications with an energy-efficient relay network (2021, June 1)
retrieved 5 June 2021
from https://techxplore.com/news/2021-06-maximizing-5g-energy-efficient-relay-network.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.

For all the latest Technology News Click Here 

 For the latest news and updates, follow us on Google News

Read original article here

Denial of responsibility! TechNewsBoy.com is an automatic aggregator around the global media. All the content are available free on Internet. We have just arranged it in one platform for educational purpose only. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials on our website, please contact us by email – abuse@technewsboy.com. The content will be deleted within 24 hours.
Exit mobile version