Novel adaptation for existing blast furnaces could reduce steelmaking emissions by 90%

Researchers from the University of Birmingham have designed a novel adaptation for existing iron and steel furnaces that could reduce carbon dioxide (CO₂) emissions from the steelmaking industry by nearly 90%.

This radical reduction is achieved through a “closed loop” carbon recycling system, which could replace 90% of the coke typically used in current blast furnace-basic oxygen furnace systems and produces oxygen as a biproduct.

Devised by Professor Yulong Ding and Dr. Harriet Kildahl from the University of Birmingham’s School of Chemical Engineering, the system is detailed in a paper published in the Journal of Cleaner Production, which shows that if implemented in the U.K. alone, it could deliver cost savings of £1.28 billion in five years while reducing overall U.K. emissions by 2.9%.

Professor Ding said, “Current proposals for decarbonizing the steel sector rely on phasing out existing plants and introducing electric arc furnaces powered by renewable electricity. However, an electric arc furnace plant can cost over £1 billion to build, which makes this switch economically unfeasible in the time remaining to meet the Paris Climate Agreement. The system we are proposing can be retrofitted to existing plants, which reduces the risk of stranded assets, and both the reduction in CO₂, and the cost savings, are seen immediately.”

Most of the world’s steel is produced via blast furnaces which produce iron from iron ore and basic oxygen furnaces which turn that iron into steel.

The process is inherently carbon intensive, using metallurgical coke produced by destructive distillation of coal in a coke oven, which reacts with the oxygen in the hot air blast to produce carbon monoxide. This reacts with the iron ore in the furnace to produce CO₂. The top gas from the furnace contains mainly nitrogen, CO and CO₂, which is burned to raise the air blast temperature up to 1,200 to 1,350 degrees Celsius in a hot stove before blown to the furnace, with the CO₂ and N₂ (also containing NO_x) emitted to the environment.

The novel recycling system captures the CO₂ from the top gas and reduces it to CO using a crystalline mineral lattice known as a “perovskite” material. The material was chosen as the reactions take place within a range of temperatures (700–800 degrees Celsius) that can be powered by renewable energy sources and/or generated using heat exchangers connected to the blast furnaces.

Under a high concentration of CO₂, the perovskite splits CO₂ into oxygen, which is absorbed into the lattice, and CO, which is fed back into the blast furnace. The perovskite can be regenerated to its original form in a chemical reaction that takes place in a low oxygen environment. The oxygen produced can be used in the basic oxygen furnace to produce steel.

Iron and steelmaking is the biggest emitter of CO₂ of all foundation industrial sectors, accounting for 9% of global emissions. According to the International Renewable Energy Agency (IRENA), it must achieve a 90% reduction in emissions by 2050 to limit global warming to 1.5 degrees Celsius.