Reduced power consumption in semiconductor devices

Schematic of the effect of the “stepping-stone” current flow formed via the platinum nanoparticles inserted in the thin phase-transition oxide film. Credit: POSTECH

Stepping stones are placed to help travelers to cross streams. As long as there are stepping stones that connect both sides of the water, one can easily get across with just a few steps. Using the same principle, a research team at POSTECH has developed technology that cuts the power consumption in semiconductor devices in half by using strategically placed nanoparticles.

A research team led by Professor Junwoo Son and Dr. Minguk Cho (Department of Materials Science and Engineering) at POSTECH has succeeded in maximizing the switching efficiency of oxide semiconductor devices by inserting platinum nanoparticles. The findings from the study were recently published in Nature Communications.

The oxide material with the metal-insulator phase transition, in which the phase of a material rapidly changes from an insulator to a metal when the threshold voltage is reached, is spotlighted as a key material for fabricating low-power semiconductor devices.

The metal–insulator phase transition occurs when insulator domains, several nanometers wide, are transformed into metal domains. The key was to reduce the magnitude of the voltage applied to the device to increase the switching efficiency of a semiconductor device.

The research team succeeded in increasing the switching efficiency of the device by using platinum nanoparticles. When voltage was applied to a device, an electric current “skipped” through these particles and a rapid phase transition occurred.

The memory effect of the device also increased by more than a million times. In general, after the voltage is cut off, these devices immediately change to the insulator phase where no current flows; this duration was extremely short at 1 millionth of a second. However, it was confirmed that the memory effect regarding the previous firing of the devices can be increased to several seconds, and the device could be operated again with relatively low voltage owing to the residual metallic domains remaining near the platinum nanoparticles.

This technology is anticipated to be essential for the development of next-generation electronic devices, such as intelligent semiconductors or neuromorphic semiconductor devices that can process vast amounts of data with less power.


High-performance hysteresis-free perovskite transistors


More information:
Minguk Jo et al, Embedded metallic nanoparticles facilitate metastability of switchable metallic domains in Mott threshold switches, Nature Communications (2022). DOI: 10.1038/s41467-022-32081-x

Provided by
Pohang University of Science & Technology (POSTECH)

Citation:
Reduced power consumption in semiconductor devices (2022, September 22)
retrieved 22 September 2022
from https://techxplore.com/news/2022-09-power-consumption-semiconductor-devices.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.

For all the latest Technology News Click Here 

 For the latest news and updates, follow us on Google News

Read original article here

Denial of responsibility! TechNewsBoy.com is an automatic aggregator around the global media. All the content are available free on Internet. We have just arranged it in one platform for educational purpose only. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials on our website, please contact us by email – [email protected]. The content will be deleted within 24 hours.